Gauge Dash Pod / Holder with Two 52mm Gauge Kit

Pillar Pod Features:

• Grey in Colour
• Top of Dash
• Clip in Design
• Holds 2 x 52mm Gauges
• Will not wrap or dis-colour from heat & sunlight
• ABS Injection Moulded Plastic - OEM look & feel
• Attaches straight into dash top once you remove the factory trim
• See image for instructions - straight forward and hassle free
• Instructions Provided

Gauge Features:

• White Dial Face
• Multiple colour options at the touch of a button
• Fitting hardware included

Oil Pressure - Gauge
• Electrical type
• Ranging from 0 to 140psi 

Boost Gauge
• Mechanical type
• Ranging from 30 In-Hg to 20 psi

Suits Ford BA BF Falcon XR6 XR6T FPV Typhoon F6

Note: We recommend our oil sandwich plate kit also which allows you to connect oil pressure and oil temp gauges whilst maintaining your factory oil pressure warning light.

FITMENT NOTES:

The sender is most commonly piggy backed off the OE oil pressure sender/switch using a brass T-Adaptor. Alternatively, consider using a SAAS oil filter sandwich plate listed in our store under models/engines that provides up to 3 sender ports for accessories.

Should the standard sender wire not be long enough, splice in an additional length of wire with a gauge NO GREATER than supplied loom wire. SAAS recommends <= 20AWG wire. Use of a heavier gauge wire or of too greater length will impact resistance and distort temperature readings.