Genuine SAAS Diff Breather Kit 4 Port Stainless Bracket 1/8 BSP for Mitsubishi

SAAS Driveline Breather Kits work to prevent water from entering your differentials, transmission, and transfer case - depending on your fitment arrangement. Kits are produced to suit two-port, four-port or six-port installation and come with quality 8mm breather hose in spring style design featuring flexible polyurethane for improved install, extended travel and hose longevity.

Supplied with high-quality fittings and a custom manifold for a compact install, the SAAS Breather kits have rear-mounted washable filters that sit out of sight and away from the elements. You'll be set for a huge variety of water crossings as the isolated ports aim to protect from contamination in the event of mechanical failure or flow back. You can plumb the kit into the vehicle's airbox to maximise the potential of uninterrupted air supply if the vehicle is submerged underwater temporarily.

Features:

• Prevent water ingress to your differentials, transmission and transfer case
• Universal compact design - suits any breather with 1/8 BSP ports
• All ports are isolated and protected from contaminating the other in the event of mechanical failure or flow back
• Stainless Steel labelled 4 Port manifold
• Top mounted washable micro filters
• Comprehensive fitting kit Included
• 10 metre hose kit

Specifications:

• Manifold Block: DBC23
  • 4 port plumbing
  • Stainless Steel Bracket
• Brass filter: DBC22
  • 1/8 BSPT port thread
  • Washable
• Connector Straight BSP: DBC02 1/8 BSP
  • 1/8 BSPT port thread
  • Suits 8mm poly pipe
  • Easy push connect/disconnect
  • Teflon treatment for sealing
  • Temperature Rated 0° to 60°
• Connector Elbow: DBC013
  • 1/8 BSPT port thread
  • Suits 8mm poly pipe
  • Easy push connect/disconnect
  • Teflon treatment for sealing
  • Temperature Rated 0° to 60°
• Pipe Y Joiner: DBC21
  • Suits 8mm poly pipe
  • Easy push connect/disconnect
• Block off Plug: DBC09 1/8 BSP
  • 1/8 BSPT port thread
• Bulkhead Fitting: DBC20
  • Suits 8mm poly pipe
  • Easy push connect/disconnect
  • Temperature Rated 0° to 60°
• Hose Spring: DBC07
  • 8mm polyurethane pipe
  • 2 metre length (extended)
  • Coil wound for flexibility
  • Rated -20° to 80°
  • Pressure Rated 75 - 115 psi
• Hose roll: DBC16 10m
  • 8mm polyurethane pipe
  • 10 metre length
  • Rated -20° to 80°
  • Pressure Rated 75 - 115 psi
• Download: TBA

Special Fitting Note re Mitsubishi

Some Mitsubishi vehicles feature a press in bung for the breather - if you have a Mitsubishi SAAS recommends purchasing the DB1001 nylon bush kit.