SAAS Top of Dash Black Dash Pod with Two 52mm Gauges, Twin Gauge Combo

NB: Finished in a raw black ABS (brushed) for easy colour matching
They must be painted to match your dash colour

• SGP5104
• 2 x 52mm Gauges
• Colour change button on front of Gauge - 7 colours
• Gauges includes Harnesses & Sender Units
• Gauge Pod attaches straight into dash top replacing the OEM cover / grille
• Low & sleek design which keeps visibility at an optimum level
• Made from ABS plastic - will not warp or discolour
• OEM look feel and design
• Can be painted to match interior colours (buyer)
• Made right here in Australia
• Instructions are provided

Approximate Dimensions:
• 240mm Rear / 200mm Front
• 160mm Depth / 85mm Height

Guages:
• SG-OP52W - SAAS Oil Pressure - White Face / Grey Rim
• SG-OT52W - SAAS Oil Temp - White Face / Grey Rim

Suits:

• VE Series 1 / I (From 2006 - 2010)
• SS SV6 & Omega (Excluding Series 1 Berlina & Calais)

• VE Series 2 / II (From Late 2010 - 2013)
• Holden Commodore
• SS SSV SV6 Omega Berlina & Calais

The sender is most commonly piggy backed off the OE oil pressure sender/switch using a brass T-Adaptor. Alternatively, consider using a SAAS oil filter sandwich plate listed in our store under models/engines that provides up to 3 sender ports for accessories.

Should the standard sender wire not be long enough, splice in an additional length of wire with a gauge NO GREATER than supplied loom wire. SAAS recommends <= 20AWG wire. Use of a heavier gauge wire or of too greater length will impact resistance and distort temperature readings.